Skip to main content
Jawbone Up Black Onyx Fitness Tracking Wristband - Small

Product details

  • Brand: Jawbone
  • Catalogue number: 343/1085


Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

Useful links

FAQs

Things to try: - Make sure the band is fully connected to the charging cable, and the charging cable is well connected to the USB port. - Try charging the band through a different USB port. - Try a Soft Reset on the band: 1. Start with the UP connected to the charger, but do not connect the charger to a power source. 2. PRESS + HOLD the button on the UP while connecting the charger into the USB port on a well-powered computer. 3. Release the button on the band. The Sun status light cycles through multiple colors, then will begin to slowly pulse, indicating that the band is charging normally. If the band is Orange or Purple, the Sun first glows solidly, then the Sun and Moon status lights flash alternately. 4. Allow the band to charge for a full 80 minutes, until the Sun status light changes to a solid light. 5. Remove the UP from the charger. The Sun status light will begin to flash quickly. If the band is Orange or Purple, the Sun and Moon status lights flash together. 6. Launch the UP app. Allow it fully open, then plug in the band. The sync will start automatically. If it doesn't, initiate the sync manually “ for iOS devices swipe to the right menu screen and touch Sync Now. For Android, touch the sync spin circle in the upper right hand corner of the Home screen. 7. Check for the band's remaining life during the sync; after resetting the band and allowing a full charge, it should display 100%.

If you can’t hear sounds on your phone, check the following: 

  • Check that the volume is turned up. 
  • Check that silent mode has not been available. 
  • Inspect the speakers for any visible debris that may be blocking the sound. Remove with a soft brush if necessary. 
  • Reboot the phone by turning off and on. Alternatively, press and hold the Power and Volume Up button for 15 seconds. 
  • If the sound issue only occurs on a specific app, check for any app updates. 
  • Check your phone for any software updates. If available, update the software. 
  • If your phone has Do Not Disturb mode, try turning this off. This mode silences sounds and notifications. 
  • If you are using headphones, check that the headphones are secure in the phone. If necessary, try another pair of headphones to determine if the headphones are not producing sound rather than the phone. 
  • Check if your phone is connected to another Bluetooth device and disconnect if necessary for the sound to come out of the phone direct. 
  • Perform a Factory Reset. Please note, this will erase all data and settings from your phone. 

Click here to read our full article on what to do if you can't hear sounds on your phone.

If you can’t send text messages from your phone, check the following: 

  • Check that you have sufficient signal by looking at the signal strength. 
  • Visit your network provider’s website to check if there are any disruptions in your area. 
  • Check that the Short Message Centre (SMSC) number is correct in your phone. Contact your network provider to get the correct number. 
  • If using a specific messaging app such as WhatsApp or Facebook Messenger, check for any updates or any software settings. 
  • Ensure your phone has not run out of storage. If it is full, it will hinder the ability to send messages. 
  • Check that the Access Point Name (APN) settings are correct. Contact your network provider to get the correct settings. 
  • Reboot the phone by turning off and on. Alternatively, press and hold the Power and Volume Up button for 15 seconds. 
  • Try the SIM card in another phone to check if it is an issue with the SIM itself. 

If the issue remains, we recommend contacting your network provider for further support. 

If you can’t make calls, but you can receive them, check the following: 

  • Check that you have sufficient signal by looking at the signal strength. 
  • Visit your network provider’s website to check if there are any disruptions in your area. 
  • Check that you have not accidentally activated call restrictions such as call-blocking. 
  • If you have a prepaid SIM, check that you have sufficient balance and top up if necessary. 
  • If you are in an area where you should be roaming, check that your roaming settings are enabled. 
  • If you use Voice over LTE (VoLTE) check that this is turned on. 
  • Check that your network settings are up to date. Contact your network provider for the latest settings.  
  • Try the SIM card in another phone to check if it is an issue with the SIM itself. 
  • Reboot the phone by turning off and on. Alternatively, press and hold the Power and Volume Up button for 15 seconds.

If the issue remains, we recommend contacting your network provider for further support. 

If your mobile data isn’t working, check the following:

  • Check that you have sufficient signal by looking at the signal strength. 
  • Visit your network provider’s website to check if there are any disruptions in your area. 
  • Check that mobile data is turned on. 
  • If you are roaming, ensure that you your roaming settings are correctly configured.  
  • Check that the Access Point Name (APN) settings are correct on your phone. 
  • If you have set a data usage limit on your SIM or phone, check to see if this has been reached. 
  • Try the SIM card in another phone to check if it is an issue with the SIM itself. 
  • Reboot the phone by turning off and on. Alternatively, press and hold the Power and Volume Up button for 15 seconds.

If the issue remains, we recommend contacting your network provider for further support. 

Questions & answers

How-to videos

  • How To Perform a Soft Reset

  • Setting Up Your New Band

  • How to Switch Modes

  • How to Wear and Care for Your Band

Returns policy

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.

If you still need to return your product then please visit our most up to date returns policy here.