Skip to main content
Black & Decker NV7210N Dustbuster Handheld Vacuum Cleaner

Product details

  • Brand: Black & Decker
  • Catalogue number: 159/9187
  • Manufacturer's number: NV7210N-RGGB

Black & Decker Support

UK: Eire:
01753 511234 01 409 7438
Mon-Fri: Sat-Sun:
9am to 5pm Closed

Argos Troubleshooter

Resolve problems quickly with this easy-to-use tool.

Click to start the troubleshooter


Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

Useful links

Online support

FAQs

Your Black & Decker corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. 

Warning! Before performing any maintenance on corded/ cordless power tools: Switch off and unplug the appliance/tool. Or switch off and remove the battery from the appliance/tool if the appliance/tool has a separate battery pack. Or run the battery down completely if it is integral and then switch off. Unplug the charger before cleaning it. Your charger does not require any maintenance apart from regular cleaning. Regularly clean the ventilation slots in your appliance/tool/charger using a soft brush or dry cloth. Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

The filters should be replaced every 6 to 9 months and whenever worn or damaged.

The dust bowls and filters can be washed in warm soapy water. Make sure that the filters and the dust bowl are dry before re-fitting.

  • For everyday spills of dry material, use your appliance without the squeegee accessory. 
  • Warning! Your product is designed for light spills only. 
  • This appliance can also be used to pick up everyday liquid spills. 
  • Use the squeegee accessory on non-absorbent, hard surfaces. 
  • On absorbent surfaces, such as carpet, your appliance will pick up wet spills better without the accessory. 
  • For best performance on hard surface wet pickups, insert squeegee into the bowl nozzle opening. 
  • For best results when using this accessory, hold the appliance at an angle of 45° and pull it slowly towards you. 
  • Do not fill the bowl beyond the end of the intake chute. 
  • If there is any liquid in the bowl, do not turn the unit upside down, sideways, point the nozzle upward, or shake the vac excessively. 
  • After picking up liquid substances clean the appliance and filter immediately. 
  • Mold and mildew may form if the unit is not properly cleaned after wet pickups. 
  • Before charging, be sure to empty all liquid contents and dry thoroughly, to avoid damage to your appliance.

Make sure that the appliance is switched off. The battery will not be charged with the on/off switch in the on position. Place the appliance on the charging bracket. Plug in the charger. Switch on at the mains. Leave the appliance to charge for at least 21 hours. While charging, the charger may become warm. This is normal and does not indicate a problem. The appliance can be left connected to the charger indefinitely. 

Warning!: Do not charge the battery at ambient temperatures below 10°C or above 40°C. 

Note: Ensure the appliance is fully seated onto the charging base. If the appliance is not fully seated then the appliance will not charge.

Your Black & Decker corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Warning! Before performing any maintenance on corded/ cordless power tools: Switch off and unplug the appliance/tool. Or switch off and remove the battery from the appliance/tool if the appliance/tool has a separate battery pack. Or run the battery down completely if it is integral and then switch off. Unplug the charger before cleaning it. Your charger does not require any maintenance apart from regular cleaning. Regularly clean the ventilation slots in your appliance/tool/charger using a soft brush or dry cloth. Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

If your vacuum is experiencing a loss of suction, please try the following:

  • Check for any debris or blockages in the tubing and main body.
  • Ensure the filter has been cleaned and left to dry as per the maintenance and care instructions.
  • Check to see if the issue is happening on all attachments. If it is happening with a particular attachment then check there is no damage to this attachment and it is fitted correctly.

If you are still experiencing issues, please get in touch with the support team using the contact details on this page.

If the vacuum isn’t charging, please try the following:

  • Try an alternative plug socket.
  • Ensure there is no debris stuck in the charging port or at the end of the charging cable.
  • Gently wipe the end of the charging cable with a clean, dry cloth.

If you are still experiencing issues, please get in touch with the support team using the contact details on this page.

Questions & answers

How-to videos

  • How to solve suction issues on your vacuum

Interactive Help

Returns policy

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.

If you still need to return your product then please visit our most up to date returns policy here.