Wahoo Fitness RFLKT Bike Computer

Bar Mount 

1. Out of the box the RFLKT will come attached to bar mount 
2. Place the bar mount around the handlebars and secure it with the screw provided in the box 
3. If the bar mount is too big for your handlebars, use the black shims found in the box to decrease the diameter of the mount

Stem Mount 

1. Remove the RFLKT from the bar mount using the metal Wahoo tool provided in the box. At the top of bar mount there is a slot to place the tool. Push down on the tool to pop the RFLKT out of the mount. A tire lever or a flat head screwdriver will also work. 
2. Place the curved rubber rectangle on your stem. Then place the stem mount on top with the slot, facing front towards the handlebars. 
3. Attach the mount to the stem of your bike using the right and left hooks with the rubber band provided. If you choose to use zip ties to secure the mount, use the top and bottom hooks to secure the mount. 
4. Please note that the stem mount will not fit oversized stems using the rubber band. To use with an oversized stem, simply attach using zip ties. 
5. After the mount is secured, snap your RFLKT in to the stem mount and you're ready to ride!

1. Open the Wahoo Fitness App 
2. Press one of the buttons on the RFLKT to wake it up 
3. Make sure "Biking" is selected in the workout section 
4. Select the sensors button on the top left corner of the screen 
5. Next to RFLKT, select the "pair" button 
6. You'll know it's connected when the word "searching" changes to "paired" 
7. Once connected to the App, press Start Workout and begin your ride! 
8. For every other ride, just open your App and touch any button on the RFLKT and the RFLKT will pair automatically

1. To end your workout, simply hit Pause > Stop > and Save workout 
2. RFLKT will stop receiving data as soon as you end the workout 
3. After 90 seconds, RFLKT will go to sleep - no need to turn it off

1. Make sure to take the RFLKT off of the mount before trying to unscrew the back to change the battery 
2. Use a small philips head screwdriver to remove the back of the device 
3. Replace the dead battery with a new CR2450 coin cell battery, which can be purchased at any grocery store or pharmacy 
4. Replace the screws, making sure the black rubber ring does not fall out during the swap- otherwise your RFLKT will no longer be water resistant

• Once your RFLKT has been paired and your workout has started, select the cog icon at the top right hand corner of the screen 
• Toggle "Display Backlight" to on and the light on the RFLKT will turn on and stay on 
• The light will not turn off until the RFLKT is turned off. Please note that leaving the backlight on for extended periods of time with significantly decrease battery life.

1. If your screen freezes, you can easily reset your RFLKT by pressing and holding the top two buttons on your RFLKT for 5 seconds.
2. The screen will flash and will show the "searching" screen.

Bar Mount 1. Out of the box the RFLKT will come attached to bar mount 2. Place the bar mount around the handlebars and secure it with the screw provided in the box 3. If the bar mount is too big for your handlebars, use the black shims found in the box to decrease the diameter of the mount Stem Mount 1. Remove the RFLKT from the bar mount using the metal Wahoo tool provided in the box. At the top of bar mount there is a slot to place the tool. Push down on the tool to pop the RFLKT out of the mount. A tire lever or a flat head screwdriver will also work. 2. Place the curved rubber rectangle on your stem. Then place the stem mount on top with the slot, facing front towards the handlebars. 3. Attach the mount to the stem of your bike using the right and left hooks with the rubber band provided. If you choose to use zip ties to secure the mount, use the top and bottom hooks to secure the mount. 4. Please note that the stem mount will not fit oversized stems using the rubber band. To use with an oversized stem, simply attach using zip ties. 5. After the mount is secured, snap your RFLKT in to the stem mount and you're ready to ride!