Skip to main content
DYSON DC40E MULTIFLOOR BLS UPR

Product details

  • Brand: Dyson
  • Catalogue number: 268/5069
  • Manufacturer's number: DC40E

Dyson Support

UK: Eire:
0800 298 0298 01 4757 109
Mon-Fri: Sat-Sun:
8am to 8pm 8am to 6pm

Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

FAQs

  • Empty as soon as the dirt reaches the level of the MAX mark do not overfill. 
  • Switch OFF and unplug before emptying the clear bin. 
  • To remove the cyclone and clear bin unit, press down on the red button at the rear of the carrying handle on the cyclone. 
  • To release the dirt, press all the way down on the red button at the rear of the carrying handle on the cyclone. 
  • To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty. 
  • Remove the clear bin carefully. Seal the bag tightly, dispose as normal. 
  • To refit: close the clear bin base so it clicks into place push the cyclone and clear bin unit into the main body of the appliance; it will click into place ensure the cyclone and clear bin unit is secure.

To maintain your Dyson machine we recommend that you wash your filter(s) at least once every 3-6 months. Please see the video library below for a tutorial.

Do not carry out any maintenance or repair work other than that shown in this Dyson Operating Manual, or advised by the Dyson Helpline. Only use parts recommended by Dyson. If you do not this could invalidate your guarantee. Store the appliance indoors. Do not use or store it below 0°C. Ensure the appliance is at room temperature before operating. Clean the appliance only with a dry cloth. Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the appliance. If used in a garage, always wipe the base plate, ball and stabiliser wheels with a dry cloth after vacuuming to clean off any sand, dirt, or pebbles that could damage delicate floors.

Do not carry out any maintenance or repair work other than that shown in this Dyson Operating Manual, or advised by the Dyson Helpline. Only use parts recommended by Dyson. If you do not this could invalidate your warranty. Store the appliance indoors. Do not use or store it below 32°F. Ensure the appliance is at room temperature before operating. Clean the appliance only with a dry cloth. Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the appliance. If used in a garage, always wipe the base plate, ball and stabilizer wheels with a dry cloth after vacuuming to clean off any sand, dirt, or pebbles that could damage delicate floors.

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the machine or tools are blocked. If your machine cuts out, unplug it and leave it for at least an hour to cool down. Remember to turn the power off and unplug the machine before you check for blockages prior to re-starting the machine.

Please click here and select your model for comprehensive support information.

Please click here where you can view the spare parts available.

How-to videos

  • Getting started

  • Cleaning different floors

  • Washing the filters

  • Resetting the brushbar

  • Vacuum wont recline

  • How to change your plugs fuse

Returns policy

If you need advice about your product, please in the first instance contact the support provider using the number on this support page.

If your product has developed a fault or you need to return it then please visit our most up to date returns policy here.