Skip to main content
Nutri Ninja BL450UKSG Blender - Space Grey

Product details

  • Brand: Nutri Ninja
  • Catalogue number: 575/9772
  • Manufacturer's number: BL450UKSG

Nutri Ninja Support

UK: Eire:
0800 862 0453 +44 800 862 0453
Mon-Fri: Sat-Sun:
9am to 5pm Closed

Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

FAQs

Make sure that your lid or blade assembly is properly assembled to the cup. Leaking may occur if it is misaligned when twisted onto the cup. Turn the lid tightly clockwise.

Pulse ingredients for best results. Press down on the cup in short intervals for even blending and chopping. For frozen ingredients, pulse in short intervals of 2-5 seconds and repeat.

The food has been over processed. Use short pulses for best results. Press down on the cup in short intervals.

Either you are chopping too much food at once, or you are not pulsing properly. Reduce the amount of food in the cup.

Make sure that the motor base is unplugged from the power source before inserting or removing any attachment and before cleaning. 

CAUTION: DO NOT immerse the motor base into water or any other liquid. 

  1. Separate/remove all parts from each other. 
  2. Clean the motor base with a damp cloth and wipe dry. 
  3. Place cups in the dishwasher. Place the lids and attachments on the top rack. Use caution when handling the blade assemblies as the blades are very sharp.

Set the cup on a level surface. Place the lid or blade assembly on top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so that the lid/blades evenly align to the cup until you have a tight seal.

For the cups, make sure that the tabs are seated in the slots and turned clockwise.

Make sure that your lid or blade assembly is properly assembled to the cup. Leaking may occur if it is misaligned when twisted onto the cup. Turn the lid tightly clockwise.

Unplug the power cord from the electrical outlet and call customer service for support.

If your blender won’t start, check the following: 

  • Check that the blender is correctly aligned. 
  • Check that there are no gaps in the assembly. 
  • Try an alternative plug socket. 
  • Change the fuse in the plug.

If the issue remains, please contact the support team using the details on this page. 

If your blender is leaking, check the following: 

  • Check that the blender is correctly aligned. 
  • Check that there are no gaps in the assembly.

If the issue remains, please contact the support team using the details on this page. 

If the blender blades are stuck, check the following once you have unplugged the unit completely and disconnected from power. Before inspecting, take caution to not touch the blades with your fingers to avoid injury: 

  • Check the blades for any food debris by using a spatula to dislodge. 
  • Check that the blades are correctly attached to the assembly.

If the issue remains, please contact the support team using the details on this page. 

If your blender is making unusual noises, check the following: 

  • Check that the blender is correctly aligned. 
  • Check that there are no gaps in the assembly. 
  • Ensure the unit is on a stable surface. 
  • Check that there is no food or debris stuck in the unit.

If the issue remains, please contact the support team using the details on this page. 

If your blender is not blending smoothly, try the following: 

  • Cut the ingredients into smaller pieces. 
  • Ensure you have added liquid to get smoother results. 
  • Try different settings, such as pulsing. 
  • Try alternative ingredients or change the recipe. 

Blenders may overheat and shut down if there is too much strain put into the motor and blades. If this happens, turn the unit off and unplug. Allow it to cool down and check for any food debris that may be caught in the blades and overworking them. Remove any debris, and start again.  

We recommend doing shorter pulses of blending rather than blending for a long time to avoid overheating.  

If the issue remains, please contact the support team using the details on this page. 

If the blender isn’t responding to buttons, check the following: 

  • Check the unit is correctly aligned. 
  • Try an alternative mains plug socket. 
  • Change the fuse in the plug.

If the issue remains, please contact the support team using the details on this page. 

The blender jug may become cloudy due to food and debris build up over time. Clean the jug following the cleaning instructions in your user guide. 

How-to videos

  • Product Demonstration

  • Learn More About the Nutri Ninja

  • Fruit Smoothie Recipe by Nutri Ninja

  • How to Prevent Overheating

Returns policy

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.

If you still need to return your product then please visit our most up to date returns policy here.