Skip to main content
Bush DW12LSINT Full Size Integrated Dishwasher - White

Product details

  • Brand: Bush
  • Catalogue number: 847/1198
  • Manufacturer's number: DW12LSINT

Argos Service Line

UK: Eire:
0345 257 7271 +44 345 257 7271
Mon-Sat: Sun:
9am to 6pm 10am to 4pm

Argos Troubleshooter

Resolve problems quickly with this easy-to-use tool.

Click to start the troubleshooter


Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

FAQs

If these lights are flashing, this would suggest an issue with the flow of water. To rectify, please try the following:

  • Remove any kinks or bends from the water inlet hose and drainage hose.
  • Ensure the filter is clear at the bottom of the appliance.
  • Ensure the water tap is fully open.
  • Perform a reset by turning the water tap and appliance off, holding down the start button for 10 seconds, then turning the water tap and appliance back on and re attempting a cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance.
  • Serial number sticker.
  • Error code/lights flashing.
  • Connections at the back of the dishwasher.

If the P2 and P4 lights are flashing, this would suggest a continuous water input. To rectify this, please try the following:

  • Ensure the water inlet is straight with no blockages.
  • Ensure the water tap is open.
  • Perform a reset by turning the water tap and appliance off, holding down the start button for 10 seconds, then turning the water tap and appliance back on and re attempting a cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance.
  • Serial number sticker.
  • Error code/lights flashing.
  • Connections at the back of the dishwasher.

If the P3 and P4 lights are flashing, this would suggest an inability to discharge water. To rectify this, please try the following:

  • Remove any kinks or bends from the water inlet hose and drainage hose.
  • Ensure the filter is clear at the bottom of the appliance.
  • Perform a reset by turning the water tap and appliance off, holding down the start button for 10 seconds, then turning the water tap and appliance back on and re attempting a cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance.
  • Serial number sticker.
  • Error code/lights flashing.
  • Connections at the back of the dishwasher.

If the P1 and P4 lights are flashing, this would suggest an issue with the heating. To rectify this, please try the following:

  • Perform a reset by turning the water tap and appliance off, holding down the start button for 10 seconds, then turning the water tap and appliance back on and re attempting a cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance.
  • Serial number sticker.
  • Error code/lights flashing.

If the P2 and P3 lights are flashing, this would suggest an issue with the water flow. To rectify this, please try the following:

  • Ensure the appliance is plugged into the mains socket only.
  • Remove any kinks or bends from the water inlet hose and drainage hose.
  • Ensure the filter is clear at the bottom of the appliance.
  • Perform a reset by turning the water tap and appliance off, holding down the start button for 10 seconds, then turning the water tap and appliance back on and re attempting a cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance.
  • Serial number sticker.
  • Error code/lights flashing.
  • Connections at the back of the dishwasher.

If the P1, P2, P3 and P4 lights are flashing, please try the following:

  • Ensure the filter is clear at the bottom of the appliance.
  • Perform a reset by turning the water tap and appliance off, holding down the start button for 10 seconds, then turning the water tap and appliance back on and re attempting a cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance.
  • Serial number sticker.
  • Error code/lights flashing.

If the dishwasher isn’t draining, try the following:

  • Ensure the filter has been fully removed and cleaned, and the filter housing area has been cleaned.

  • Check that the outlet pipe is not kinked.
  • Check the outlet pipe for any blockages.
  • Try a hot wash to give the internal pipes a good clean.
  • Check for any error codes on-screen and refer to your user manual.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Connections at the back of the dishwasher
  • Any affected areas you can see

If the programme will not start, check the following:

  • Is there water going into the appliance? If not, check the inlet pipe and ensure the tap is fully open.
  • Check if a delay timer has been set.
  • Turn the appliance off, switch off from the plug and unplug. Whilst unplugged hold down the start/pause button for 10 seconds. Before switching back on leave the appliance for around 30 seconds, then switch back on.
  • Check that the door is closing properly.
  • Check for any error codes on-screen and refer to your user manual.
  • Ensure the filter has been fully removed and cleaned, and the filter housing area has been cleaned.

  • Check that the outlet pipe is not kinked.

  • Check the outlet pipe for any blockages.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Connections under the sink
  • Any affected areas you can see

If the tablet dispenser is not closing, try the following:

  • Check the tablets inserted are not too large.
  • Check if it is clicking into place properly when closing.
  • Ensure nothing is obstructing it from closing.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Tablet area
  • Any affected areas you can see

If the tablet dispenser is not opening, try the following:

  • Check the water pressure on the appliance.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Tablet area
  • Any affected areas you can see

If there are water marks left on dishes or cutlery, try the following:

  • Ensure the rinse aid has been topped up.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Water marks left
  • Any affected areas you can see

If there are food deposits left on dishes or cutlery, try the following:

  • Clean the filter and spray arms.

  • Ensure plates have been washed off/rinse before putting into the dishwasher.
  • Check the inlet pipe for any kinks or blockages.
  • Leave space between dishes.
  • Ensure the appliance has not been overloaded.
  • Check if the correct tablets have been used and that they are releasing during the cycle.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Filter
  • Affected dishes or cutlery
  • Any affected areas you can see

If the spray arms aren’t moving, try the following:

  • Remove the spray arms and clean them by soaking in warm water and using an ear bud to clean the holes.

  • Ensure they are connecting correctly.
  • Check that water is entering the appliance by ensuring the inlet pipe is not kinked or blocked.

If the issue is still not resolved, get in touch with the support team by using the contact details on this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Spray arms
  • Connections under the sink
  • Any affected areas you can see

This is an integrated dishwasher, so the door will not function correctly until the appliance has been correctly installed. Once fully installed, the fitted door will provide extra weight, and prevent it from springing back up.

Questions & answers

How-to videos

  • How to register your product

  • How to install a dishwasher

  • Not cleaning properly - Top Tips

  • Key dishwasher maintenence

  • How to Set the Salt Level

  • Connecting Inlet and Outlet Pipes

Interactive Help

Returns policy

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.

If you still need to return your product then please visit our most up to date returns policy here.