VAX BLADE CORDLESS 24V ULTRA
855/4091
Product details
- Brand: Vax
- Catalogue number: 855/4091
- Manufacturer's number: TBT3V1H1
Vax Support
Argos Troubleshooter
Resolve problems quickly with this easy-to-use tool.
Email me this page
Enter your email address to have this page emailed to you *
FAQs
The stick vac may need recharging.
The motor thermostat may have tripped. Empty the dirt container and check for blockages. Clean the filters and allow the stick vac to cool for approximately 1 hour. If you have washed the filters, wait 24 hours to fully dry before placing back on the stick vac.
Open both ends of the dirt container, remove the separator and clean all seals.
Replace the separator, filter and lid.
To improve the air flow through the stick vac, clean the filters and check for any blockages.
Check the powered head - Switch the machine on and visually inspect the powered head.
Is there a light illuminated?
No - Switch the machine on and press the brushbar on/off button on the machine.
Red light - Something has obstructed the brushbar. Switch the machine off, remove the powered head and clear any blockage from the brushbar.
White light - Now you are up and running.
Remove the dirt container from the handheld unit
Switch the machine on.
Place your hand over the hole located on the side of the handheld unit, this is where the lid of the dirt container is normally attached to.
If the suction is strong, remove the dirt container from the handheld and empty. Push the button to lift the dirt container lid. Remove the filter from the separator. Tap off any dirt/debris and rinse the filter under the tap (max 40 degrees, no detergent) allow at least 24 hours for it to fully air dry before placing back in the machine.
Check for a blockage - Remove the floorhead and then remove the reach wand from the machine
Drop a small ball of paper down the top of the reach wand. This should drop straight through. If not, you have a blockage that will need to be removed. Check the handheld unit for a blockage where the reach wand normally attaches. Check the neck of the floorhead for any blockages.
Questions & answers
How-to videos
-
How to change your plugs fuse
-
How to solve suction issues on your vacuum
Interactive Help
-
Argos Troubleshooter
Resolve problems quickly with this easy-to-use tool.
Returns policy
If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.
If you still need to return your product then please visit our most up to date returns policy here.