Skip to main content
Lay-Z-Spa St Moritz 7 Person Hot Tub -Pick up Instore Only
Buy it on Argos.co.uk

Product details

  • Brand: Lay Z Spa
  • Catalogue number: 870/9671
  • Manufacturer's number: 54175

Bestway Support

UK: Eire:
0345 5760116 +44 345 5760116
Mon-Fri: Sat-Sun:
9am to 5pm Closed

Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

Useful links

Online support

FAQs

The Lay-Z-Spa pump should always be plugged into an earthed mains plug socket. You should never attempt to run the pump from an extension lead or spur. Doing so will prevent the pump from working and display the error code E01.

The Lay-Z-Spa cannot be operated when the outside temperature drops below 4°C. The pump will enter error mode and display the error code E03/E04/E05.

Always check the condition of the filter cartridges before using your Lay-Z-Spa. Soiled or blocked filter cartridges will cause the pump to slow down or stop working. Bestway recommends washing the filter cartridges before and after every use. You should also replace them with new filter cartridges every 3 days during periods of heavy use.

Be sure to check the pipes between the Lay-Z-Spa pump and the liner. The pipes should always be free from kinks and bends. To ensure that the pipes aren’t kinked inside your spa, you may need to run your hand inside the sleeve of the inflatable liner.

This is normally caused by an electrical issue. Please check the RCD plug and fuses. Try plugging into an alternative socket. Please ensure it is not plugged into an extension lead, as this can also cause issues.

If the problem persists, your pump may need to be replaced in which case please contact the support number on this page.

To locate the puncture, apply diluted washing up liquid to the liner. Bubbles should appear where the puncture is located. To fix a puncture you will require a puncture repair kit which can be purchased from the Lay-Z-Spa Accessories pages.

Try deflate the liner slightly to eliminate the bulging.  Spas are not designed to be left in direct sunlight. If the spa is left in direct sunlight, this will cause the air inside the liner to heat up and expand. This in turn will cause the liner, which is manufactured from Vinyl to expand and bulge. This is not a manufacturing defect. The spa would need to be moved to a more shaded spot

Please click here to learn about error codes & what they mean.

How-to videos

  • How to set up

  • How to reset the pump

Returns policy

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.

If you still need to return your product then please visit our most up to date returns policy here.