Bush Clock Radio - Black

This is normal behaviour. The lights will flash to count each second and this feature cannot be turned off.

No, the time can only be used in the 12hr format. To indicate the time of day, the ‘PM’ light will show in the corner to show if it is the afternoon or morning.

The clock will not work with batteries only. The batteries will hold the time and preset stations but the display will not light up.

The clock does not have a dimmer function and the brightness of the display cannot be changed.

Use the following steps to set the alarm. In this example, we have used AL1 for Alarm 1.

1. Make sure that the Alarm clock is only displaying the time as you cannot set the Alarm if the Radio is on.

2. Press the AL1 button until the display starts to flash.

3. Press the HR button until the correct time is displayed.

Note the PM LED will light to indicate pm time set

4. Press the Min button until the correct time is displayed.

5. Press the Set Button.

6. Press the AL1 button to choose either Alarm or Radio setting.

Note the AL1 LED on the left hand side of the display will light

7. AL1 is set.

You can repeat these steps for AL2 to set Alarm 2.

1. Press AL1/AL2 until the AL1/AL2 LED is no longer lit on the display.